Welcome to the company ! we have many years of professional experience !
rsdzd@pyzyrsd.com +86 513525609655

Study on the acidity of wastewater from condensing water heater

Established in 2001, Puyang Zhong Yuan Restar Petroleum Equipment Co.,Ltd, “RSD” for short, is Henan’s high-tech enterprise with intellectual property advantages and independent legal person qualification. With registered capital of RMB 50 million, the Company has two subsidiaries-Henan Restar Separation Equipment Technology Co., Ltd We are mainly specialized in R&D, production and service of various intelligent separation and control systems in oil&gas drilling,engineering environmental protection and mining industries.We always take the lead in Chinese market shares of drilling fluid shale shaker for many years. Our products have been exported more than 20 countries and always extensively praised by customers. We are Class I network supplier of Sinopec,CNPC and CNOOC and registered supplier of ONGC, OIL India,KOC. High quality and international standard products make us gain many Large-scale drilling fluids recycling systems for Saudi Aramco and Gazprom projects.

Certificate of Honor

Get in touch with us

We will confidentially process your data and will not pass it on to a third party.

Study on the acidity of wastewater from condensing water heater
Standard Operating Procedure (SOP) 3.2.1.1 Measuring ...
Standard Operating Procedure (SOP) 3.2.1.1 Measuring ...

• ,100,-,ml, graduated cylinder; • 250-,ml, beaker; • ,pH, meter with built-in temperature sensor; • reagent (sulfuric ,acid, titration cartridge, 0.16 N); • standard alkalinity ampoules, 0.500 N, for accuracy check; and • bottle with deionized water to rinse ,pH, meter electrode. STEP 2: Collect the sample.

Nitrate - Hach
Nitrate - Hach

2. Use a pipet to add 1.0, 3.0, 10 and 30.0 ,mL, of a ,100, mg/L ,nitrate,-nitrogen (NO3––N) standard solution into four different ,100,-,mL, Class A volumetric flasks. 3. Dilute to the mark with the prepared chloride water. Mix thoroughly. 4. Complete the test procedure for each of …

Analysis Method for pH and Alkalinity | Water Resources ...
Analysis Method for pH and Alkalinity | Water Resources ...

Rinse the electrodes and your sample cup with pure deionized water. Then titrate ,100,.0 ,ml, of deionized water with your 0.16N ,acid, as follows: Make sure your digital titrator is working and reset to zero. Add 10 digits of ,acid,, record digits and ,pH,, increase ,acid, to 20 digits, record ,pH,; repeat until you have added ,100, digits of ,acid, and stop.

Iron Total - Hach
Iron Total - Hach

1. Add 5 ,mL, of 6.0 N (1:1) hydrochloric ,acid, solution to ,100 mL, of sample in a 250-,mL, Erlenmeyer flask. 2. Boil for 20 minutes. 3. Let the solution cool to room temperature. 4. Adjust the ,pH, to 3–5 with 5 N sodium hydroxide solution. 5. Add deionized water until the volume is ,100 mL,. 6. Use the treated sample in the test procedure.

Using a pH Meter to Test Wastewater - from Cole-Parmer Blog
Using a pH Meter to Test Wastewater - from Cole-Parmer Blog

14/11/2013, · 1. We recommend a 2-point calibration with a ,pH, 4 and a ,pH, 7 buffer solution for more acidic waste and a ,pH, 7 and a ,pH, 10 buffer solution for more basic waste. The electrode slope should be between 92 and 102%. 2. Just before testing, use a graduated cylinder to measure 60 ,mL, of the ,wastewater, sample into a ,100 mL, beaker. Stir the sample.

Lab 4 alkalinity –acidity and determination of alkalinity ...
Lab 4 alkalinity –acidity and determination of alkalinity ...

6/8/2015, · *Results and Calculations: 100 ml from water PH=1,0.3, “ phph from pink to colorless “ V sulfuric acid = 13 ml = A1 Phenolphthalein Alkalinity (in mg/L as CaCO3) = (A1×N ×50,000) / V = (13*.02*50000)/100 = 130 mg/L as CaCO3 PH=4 “ M.O V s = 15.5 ml - A = 13 + 15.5 = 16 ml Total Alkalinity (in mg/L as CaCO3) = (A×N ×50,000) / V = (28.5 * 0.02*50000)/100 = 285 mg/L as CaCO3

Coagulation and Flocculation in Water and Wastewater ...
Coagulation and Flocculation in Water and Wastewater ...

Acid, alum formulations are aluminum sulfate with 1 to 15-percent free sulfuric ,acid,. Their effectiveness with TOC removal applications is due to the enhanced depression of ,pH,. TOC or NOM reductions depend on the type and dosage of coagulant, the ,pH,, temperature, raw water quality and NOM characteristics.

Lab 3: Alkalinity - Water/Wastewater Distance Learning at ...
Lab 3: Alkalinity - Water/Wastewater Distance Learning at ...

The ,acid, is N/50 sulfuric ,acid,, which is the same as 0.02 N sulfuric ,acid,. The indicator for the total alkalinity test will be: methyl orange or methyl purple indicator, in a 50 to ,100 mL, dropping bottle.

High efficiency removal of Pb( ii ) in aqueous solution by ...
High efficiency removal of Pb( ii ) in aqueous solution by ...

First published on 4th January 2021. A biochar-supported nanoscale ferrous ,sulfide, composite was prepared and applied for the treatment of Pb(II) ions in aqueous solution.The experimental results of SEM, EDS, XRD, and FT-IR spectroscopy clearly implied that the biochar was successfully modified with nanoscale ferrous ,sulfide, composite.

Method of extracting rare-earth metals (rem) from ...
Method of extracting rare-earth metals (rem) from ...

In the course of opening with one solution of sulphuric ,acid, successively processed are 1-3 lots of phosphogypsum with heating, the ,water, phase is separated by filtration, the sediment is washed with ,water,, apatite is added to the filtrate in a ratio of S:L=1:10-20, with the second heating at a temperature of 50-70°C and mixing for 1-2 hours with neutralisation with sulphuric ,acid, to a ...

What acid to use for adjusting wastewater pH?
What acid to use for adjusting wastewater pH?

I have digested 0.5 g of sample in HNO³ and diluted upto ,100 ml,. After analysis on AAS the answer is 0.192 ppm. Now How to calculate the actual conc. of Cu in the actual sample?

Recovery of manganese and zinc from spent Zn-C and ...
Recovery of manganese and zinc from spent Zn-C and ...

It is possible to isolate the main metals present in the leachates by a sequential ,precipitation, procedure under controlled pH: (i) free acidity 1.1 mol L-1 - Hg, Cd, Pb and most Fe were precipitated by adding ,sodium sulfide,; (ii) pH between 1.5-2.0 - Zn (and traces of Fe) was precipitated by adding ,sodium sulfide,; (iii) pH near 7 - Mn ,can, be precipitated after adding ,sodium, hydroxide and ...

Articles
Articles

Claim2: the method for producing purified ,sodium sulfide, from a ,sodium, hydrosulfide liquor containing (a) at least one metallic impurity of the group consisting of iron, copper, nickel, manganese, and silicon, and (b) an amount of available carbonate of ,sodium, equivalent to more than 0.06% by weight of CO3 radical, which method comprises treating said liquor with an alkaline earth compound so ...

Influence of Wastewater PH on Turbidity
Influence of Wastewater PH on Turbidity

Influence of ,Wastewater PH, on Turbidity Harashit Kumar Mandal ... ,acid, or alkaline condition of water. Several factors like temperature, ... in a ,100 ml, volumetric flask and leaved it undisturbed for one full day at 250C. Make up to ,100, for one month from the stock solution is 400.

pH meters | Hanna Instruments - Official UK Store
pH meters | Hanna Instruments - Official UK Store

The people here at Hanna don't just create products - we create testing systems that help improve everything from the taste of your local craft beer to the quality of the water in your swimming pool.

New trends in removing heavy metals from industrial wastewater
New trends in removing heavy metals from industrial wastewater

1/10/2011, · The amicon-generated cellulose YM10 was used as the ultrafilter. About ,100,% and 95% rejection were achieved at ,pH, ranging from 8.5 to 9.5 for Cu(II) and Zn(II) ions, respectively. The results indicated that chitosan significantly enhanced metals removal by 6–10 times compared to using membrane alone.

Silver extraction from waste hypo/fixer solution page 6
Silver extraction from waste hypo/fixer solution page 6

SODIUM sulfide, is added to the solution of ,sodium, thiosulphate [affil. link to info/product on Amazon]. The reaction is: Ag2S2O3, 2Na2S2O2+Na2S = Ag2S+3Na2S2O3 The silver is precipitated as silver ,sulfide,. The silver ,sulfide, settles to the bottom of the container in which the reaction occurs. Silver ,sulfide can, be purchased or produced for use.

Testing the pH of Wastewater Samples from Cole-Parmer
Testing the pH of Wastewater Samples from Cole-Parmer

15/10/2018, · 1. We recommend a 2-point calibration with a ,pH, 4 and a ,pH, 7 buffer solution for more acidic waste and a ,pH, 7 and a ,pH, 10 buffer solution for more basic waste. The electrode slope should be between 92 and 102%. 2. Just before testing, use a graduated cylinder to measure 60 ,mL, of the ,wastewater, sample into a ,100 mL, beaker. Stir the sample.

Determination of Organic Acids in Wastewater Using Ion ...
Determination of Organic Acids in Wastewater Using Ion ...

Add ~50 ,mL, DI water to a ,100 mL, volumetric flask and add the appropriate volume of concentrated standard solution into the volumetric flask (Table 1). Bring to volume with DI water. Perform this preparation in a fume hood. Calibration Standard Solutions Dilute 0.1, 0.2, 0.3, and 0.4 ,mL, of mixed stock standard solution in ,100 mL, volumetric flasks with DI water for

Nano Sized Sulfide Compounds Of Cerium And A Process For The
Nano Sized Sulfide Compounds Of Cerium And A Process For The

The present invention relates to nano sized ,sulfide, compounds of cerium and a process for the preparation thereof. More particularly, the present invention provides novel nano sized particles of cerium ,sulfide, as well as a novel process for the preparation of nano sized ,sulfide, compounds of cerium by the bioreduction of cerium sulfate or cerium acetate, without resorting to chemical methods.

Chat Online Inquiry Email

Business cooperation

+86 513525609655

Company address

Road West, North Branch, Jingkai Road, Puyang City